122 lines
5.4 KiB
TOML
122 lines
5.4 KiB
TOML
###############################################################################
|
|
## PROJECT PARAMETERS ##
|
|
###############################################################################
|
|
|
|
# Configure your project parameters here
|
|
|
|
[project]
|
|
project_dir = '' # BETWEEN SINGLE QUOTES! # If empty, project dir is current dir
|
|
frame_range = [] #For example [10,300], or [] for all frames
|
|
frame_rate = 60 #Hz
|
|
|
|
rawImg_folder_name = 'raw'
|
|
calib_folder_name = 'calibration'
|
|
pose_folder_name = 'pose'
|
|
pose_json_folder_extension = 'json'
|
|
pose_img_folder_extension = 'img'
|
|
poseAssociated_folder_name = 'pose-associated'
|
|
pose3d_folder_name = 'pose-3d'
|
|
opensim_folder_name = 'opensim'
|
|
|
|
|
|
[pose]
|
|
pose_model = 'BODY_25B' #With openpose: BODY_25B, BODY_25, BODY_135, COCO, MPII.
|
|
#With mediapipe: BLAZEPOSE.
|
|
#With alphapose: HALPE_26, HALPE_68, HALPE_136, COCO_133.
|
|
#With deeplabcut: CUSTOM
|
|
# See Pose2Sim\skeleton.py for their skeleton hierarchy
|
|
# What follows has not been implemented yet
|
|
pose_framework = 'openpose' # 'openpose', 'mediapipe', 'alphapose', 'deeplabcut'
|
|
overwrite_pose = false
|
|
openpose_path = '' # only checked if OpenPose is used
|
|
|
|
|
|
[calibration]
|
|
calibration_type = 'convert' # 'convert' or 'calculate'
|
|
|
|
[calibration.convert]
|
|
convert_from = 'qualisys' # 'qualisys', 'optitrack', or 'vicon'
|
|
[calibration.convert.qualisys]
|
|
binning_factor = 1 # Usually 1, except when filming in 540p where it usually is 2
|
|
|
|
|
|
[calibration.calculate]
|
|
calculate_method = 'board' # 'board' or 'points'
|
|
|
|
[calibration.calculate.board.intrinsics] # camera properties, only needs to be done once
|
|
intrinsics_board_type = 'checkerboard' # 'checkerboard' ('charucoboard' not supported yet)
|
|
overwrite_intrinsics = false # overwrite (or not) if they have already been calculated?
|
|
show_detection_intrinsics = true # true or false (lowercase)
|
|
intrinsics_extension = 'jpg' # any video or image extension
|
|
|
|
extract_every_N_sec = 1 # if video, extract frames every N seconds (can be <1 )
|
|
intrinsics_corners_nb = [4,7]
|
|
intrinsics_square_size = 60 # mm
|
|
intrinsics_marker_size = 40 # mm # only checked if charucoboard
|
|
intrinsics_aruco_dict = 'DICT_6X6_250' # only checked if charucoboard # see https://docs.opencv.org/3.4/dc/df7/dictionary_8hpp.html
|
|
|
|
[calibration.calculate.board.extrinsics] # camera placement, needs to be done every time
|
|
extrinsics_board_type = 'scene' # 'checkerboard', 'scene' ('charucoboard' not supported yet)
|
|
# 'board' should be large enough to be detected when laid on the floor.
|
|
# 'scene' involves manually clicking any point of know coordinates on scene. Usually more accurate if points are spread out
|
|
moving_camera = false # Not implemented yet
|
|
calculate_extrinsics = true # true or false (lowercase)
|
|
show_reprojection_error = true # true or false (lowercase)
|
|
extrinsics_extension = 'png' # any video or image extension
|
|
|
|
# if extrinsics_board_type = 'checkerboard' or 'charucoboard'
|
|
extrinsics_corners_nb = [4,7] # [H,W] rather than [w,h]
|
|
extrinsics_square_size = 60 # mm # [h,w] if square is actually a rectangle
|
|
extrinsics_marker_size = 40 # mm # only checked if 'charucoboard' (not supported yet)
|
|
extrinsics_aruco_dict = 'DICT_6X6_250' # only checked if 'charucoboard' # see https://docs.opencv.org/3.4/dc/df7/dictionary_8hpp.html
|
|
|
|
# if extrinsics_board_type = 'scene'
|
|
# list of 3D coordinates to be manually labelled on images. Can also be a 2 dimensional plane. # in m
|
|
object_coords_3d = [[-2.0, 0.3, 0.0], [-2.0 , 0.0, 0.0], [-2.0, 0.0, 0.05], [-2.0, -0.3 , 0.0], [0.0, 0.3, 0.0], [0.0, 0.0, 0.0], [0.0, 0.0, 0.05], [0.0, -0.3, 0.0]] # in meters -> Not in mm! <-
|
|
|
|
|
|
[calibration.calculate.points]
|
|
calibration_points = 'wand' # 'wand' or 'keypoints'
|
|
# Not supported yet.
|
|
|
|
|
|
[personAssociation]
|
|
tracked_keypoint = 'Neck' # If the neck is not detected by the pose_model, check skeleton.py
|
|
# and choose a stable point for tracking the person of interest (e.g., 'right_shoulder' with BLAZEPOSE)
|
|
reproj_error_threshold_association = 20 # px
|
|
|
|
|
|
[triangulation]
|
|
reproj_error_threshold_triangulation = 15 # px
|
|
likelihood_threshold = 0.3
|
|
min_cameras_for_triangulation = 2
|
|
interpolation = 'cubic' #linear, slinear, quadratic, cubic, or none
|
|
# 'none' if you don't want to interpolate missing points
|
|
interp_if_gap_smaller_than = 10 # do not interpolate bigger gaps
|
|
show_interp_indices = true # true or false (lowercase). For each keypoint, return the frames that need to be interpolated
|
|
|
|
|
|
[filtering]
|
|
type = 'butterworth' # butterworth, kalman, gaussian, LOESS, median, butterworth_on_speed
|
|
display_figures = true # true or false (lowercase)
|
|
|
|
[filtering.butterworth]
|
|
order = 4
|
|
cut_off_frequency = 6 # Hz
|
|
[filtering.kalman]
|
|
# How much more do you trust triangulation results (measurements), than previous data (process assuming constant acceleration)?
|
|
trust_ratio = 100 # = measurement_trust/process_trust ~= process_noise/measurement_noise
|
|
smooth = true # should be true, unless you need real-time filtering
|
|
[filtering.butterworth_on_speed]
|
|
order = 4
|
|
cut_off_frequency = 10 # Hz
|
|
[filtering.gaussian]
|
|
sigma_kernel = 2 #px
|
|
[filtering.LOESS]
|
|
nb_values_used = 30 # = fraction of data used * nb frames
|
|
[filtering.median]
|
|
kernel_size = 9
|
|
|
|
[opensim]
|
|
|